Home > Installation > Clamps
We found 23 results matching your criteria.
Sink Hole Savers C Clamps
Lamination Clamps 90 Degree Clamps
Carry Clamps
Filter:
Page of 3
PC1440
4" HEAVY DUTY C-CLAMP
Our Price: $5.59

C Clamp. 4". From PonyTools
PC1430
3" C CLAMP
Our Price: $5.59

C Clamp. 3". From A Bottini
PC1460
6" C CLAMP
Our Price: $10.39

C Clamp. 6"
AVC200
Abaco Hand Held Suction Cup AVC200
Our Price: $48.90

With the capacity for nearly any manual lift, Abaco vacuum cups are rugged and dependable manual vacuum clamps. These are the handheld vacuum cups chosen by professional stone fabricators and glaziers around the world. Quality construction, close attention to detail during manufacturing, and individual testing has given these tools a reputation for excellence.

Unlike suction cups that produce a vacuum when they are pulled away from the glass, these vacuum cups pump out air from between the rubber pad and the glass surface, thus creating a much more reliable hold. The hand-actuated pump is spring-balanced to provide a vacuum of 20 inches Hg (at sea level). Because the full face of a flat, rubber pad is brought into contact with the finished stone or glass surface, distortion is reduced.

A black line on the plunger indicates the vacuum level of the hand cup. When the cup is attached completely, the plunger is partially hidden inside the pump and the black line is not visible. A visible black line indicates vacuum is not sufficient for a lift. If the black line starts to show during a lift, a check valve allows the operator to re-pump the cup without losing the remaining vacuum. When the lift is completed, a release device allows air to refill the evacuated space, so that release is complete, with no dangerous after-stick.

The Abaco Vacuum cup lifter features an eight-inch vacuum pad and a lightweight ABS pump and handle. It has a horizontal lifting capacity of 125 lbs. and a vertical lifting capacity of 100 lbs. This lifter comes in its own heavy-duty case.

8" Diameter Vacuum Cup
Tough light-Weight Plastic Body and barrel
Excellent for lifting and carrying Stone Tiles, slabs and Glass
Comes with heavy duty carrying case

Omni Cubed Aqua-Jawâ„¢ Handle Kit - AJ-128-HK-15
Omni Cubed Aqua-Jaw™ Handle Kit - AJ-128-HK-15
Our Price: $60.00

FOR ALL MODELS OF AQUA-JAW™ CARRY VISE™

The Omni Cubed Aqua-Jaw™ Handle Kit accessory adds two more handles to each unit, enabling four people to share the load. One set includes four handles—enough for two vises.
ABACO LC60 LAMINATION CLAMPS
ABACO LC60 LAMINATION CLAMPS
Our Price: $109.00

The Abaco Labmination Clamps are designed for holding multiple slabs together while they are being laminated and glued. The simple C-Clamp design allows it to glide easily on the bar track, and it can be loosened or tightened effortlessly. Each set comes with one bar of the chosen length, and the shown number of clamps. Each clamp weighs 2.2 pounds, and can handle 1.125 - 2.375 inch thicknesses.


Includes 2 Clamps
ABACO LC90 LAMINATION CLAMPS
ABACO LC90 LAMINATION CLAMPS
Our Price: $129.00

The Abaco Labmination Clamps are designed for holding multiple slabs together while they are being laminated and glued. The simple C-Clamp design allows it to glide easily on the bar track, and it can be loosened or tightened effortlessly. Each set comes with one bar of the chosen length, and the shown number of clamps. Each clamp weighs 2.2 pounds, and can handle 1.125 - 2.375 inch thicknesses.


Includes 3 Clamps
Omni Cubed 2' Lamination Clamp
Omni Cubed 2' Lamination Clamp
Our Price: $135.00

PRODUCT HIGHLIGHTS

  • Save time and money; reduce clamping labor by 75% or more
  • Superior speed, quality, and durability
  • Consistently achieve tight, even seams
  • Patented hidden thread design prevents epoxy contamination
  • Large handles provide more torque for easy tightening
  • Long-lasting, rust-free, quality components
  • Clamping range: 1.4" - 2.6" (36 mm - 66 mm)
  • Six lengths available: 5", 10", 2', 3', 4', 6'
PRODUCT DESCRIPTION

The Omni Cubed Lam-Clamp™ has revolutionized countertop edge laminations by exceeding traditional methods in efficiency, seam quality, and durability. The Omni Cubed Lam-Clamp's patented design features hidden clamp threads, which protects them from epoxy contamination, so they outlast any other clamps on the market. Available in six sizes for truly customizable application. The shorter lengths wrap easily around curved edges, while the longer lengths are ideal for speed and efficiency.

PATENT US7789379
PATENT US8047516
PATENT USD597813
A90CLAMP
ABACO 90 CLAMP SET OF 2
Our Price: $159.00

Designed for positioning and securing miter joints
   Miter joints remain secure as glue dries
   Quick and easy to use
Abaco Carry Clamps SHC25
Abaco Carry Clamps SHC25
Our Price: $179.90

When high quality is a must these single handed carrying clamps may be used for lifting and carrying stone slabs or sheets of glass.



These have fully vulcanized rubber pads which provide added grip and prevent damage to your materials. By eliminating the use of a forklift truck, the carrying clamps help you to work more efficiently on smaller jobs. These may be used alone or in conjuction with other pairs to move small or large pieces with ease.



This is for 2 of these clamps - that means a clamp for each of the two people moving a slab!



Specifications:


Dimensions : 8 1/2 inches x 4 3/4inches 7 7/8inches


Grip range : 0 - 1inches


Net weight : 3.3lbs


Lifting capacity per set : 220lbs