Home > Sealers > Enhancers
We found 6 results matching your criteria.
Tenax DuPont Stonetech
Akemi
Filter:
Page of 1
AKSUPGLOSS
AKEMI SUPER GLOSS
Our Price: $29.94

high-gloss lacquer made of high-quality synthetic resins and waxes, very strong colour intensification, stable to yellowing, fast drying For re-working of rough, ground, porous and absorbent natural and artificial stone surfaces. Especially suited for surfaces on which mechanical polishing is difficult or impossible due to their condition or position, e.g. edges, corners, reliefs, statues, frescos, columns or borders.

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/Akemi_Super_Gloss_SDB_GB.pdf
AKSPIDBLK
AKEMI SPIDER BLACK
Our Price: $33.94

Akemi Spider Black & Clear Enhancers Akemi Spider Black and Spider Clear hide spider veins on natural stone surfaces in just minutes! These two products also enrich the gloss of the entire surface of natural stone. Users can achieve this long-lasting effect quickly and easily, and there is no hard residue to remove after application. Just wipe the Akemi Spider on and then wipe it off for a complete finish - you're done! This product can achieve the desired effect on multiple square feet of stone in minutes, as well as the treatment of entire projects or stone slabs in a short period of time. It is formulated to work well on slab surfaces, along with tiles and edges. Use Akemi Spider Black for dark or black stones, and Akemi Spider Clear is recommended for white to medium-dark stones. Advantages: Fast drying Applies quickly and easily Solvent-containing product made of high-quality waxes and synthetic resins (free of trichloroethylene and CHC) Intensifies the colour of the stone Polishes natural Stone Hides micro-fissures and the spider web effect that can be seen on certain dark or black stones Suitable for fine ground or polished natural and artificial stones Formulated for slab surfaces, tiles and edges Can be renewed if necessary No hard residue to remove after application For indoor use

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/Akemi_Spider_Black_SDB_GB.pdf
AKSPIDCLEAR
AKEMI SPIDER CLEAR
Our Price: $33.94

Akemi Spider Black & Clear Enhancers Akemi Spider Black and Spider Clear hide spider veins on natural stone surfaces in just minutes! These two products also enrich the gloss of the entire surface of natural stone. Users can achieve this long-lasting effect quickly and easily, and there is no hard residue to remove after application. Just wipe the Akemi Spider on and then wipe it off for a complete finish - you're done! This product can achieve the desired effect on multiple square feet of stone in minutes, as well as the treatment of entire projects or stone slabs in a short period of time. It is formulated to work well on slab surfaces, along with tiles and edges. Use Akemi Spider Black for dark or black stones, and Akemi Spider Clear is recommended for white to medium-dark stones. Advantages: Fast drying Applies quickly and easily Solvent-containing product made of high-quality waxes and synthetic resins (free of trichloroethylene and CHC) Intensifies the colour of the stone Polishes natural Stone Hides micro-fissures and the spider web effect that can be seen on certain dark or black stones Suitable for fine ground or polished natural and artificial stones Formulated for slab surfaces, tiles and edges Can be renewed if necessary No hard residue to remove after application For indoor use

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/Akemi_Spider_Clear_MSDS.pdf
AKSD
AKEMI SUPER DARKENER - 1 LITER
Our Price: $49.94

Stone Enhancer- Akemi Darkener Super Akemi Darkener Super is a solvent-based special impregnator, containing reactive modified silicates that is perfect for concealing scratches and imperfections on darker-colored stones. It is absorbed by the pores through the capillary forces of the stone. Use Akemi Darkener Super Stone Enhancer indoors or outdoors on all finishes to intensify the natural color without leaving residue. Instructions for use: 1. Surface must be clean, totally dry and free from all residues. Ensure that outdoor stone does not contain any detrimental salts (nitrates, sulphates, chlorides) because these can reduce the absorption of the impregnating material. Depending on the type of stone and the degree of soiling, the following products are recommended (see techinical sheets for proper use) : Akemi Stone Cleaner, Akemi Concrete Film Remover, Akemi Rust Remover, Akemi Algae and Mildew Remover, Akemi Wax Stripper, Akemi Oil and Grease Remover Paste, Akemi Graffitti Remover. Rinse all surfaces well after cleaning. The stone must be completely dry (1-2 days) before treating with darkener super. Optimal working temperature is 15-25c (59-77f). Ensure protection from rain for approximately 4-5 hours. 2. Apply undiluted with a brush, paint roller or spraying device. Apply a thin, smooth layer allowing sufficient time for the product to be absorbed in the stone. 3. Approximately 10-15 minutes after application, remove excess completely with an absorbent cloth. 4. On very absorbent surfaces, several applications may be necessary. (Not suitable for glazed or non-absorbent surfaces.) When used as directed 1 liter will cover approximately 10-20 sq. meters.

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/Akemi%20Darkener%20Super%20Farbtonvertiefer_Super_SDB_GB.pdf
DUPENHP1QT
DuPont Enhancer Pro
Our Price: $61.00

Use on natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone & textured stone. Masonry & concrete. Directions: Read entire label before using. Use only as directed. Make sure surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24-72 hours. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes. 1. Mask off any surfaces not intended to be treated. 2. Liberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer, towel, or sponge for application. Do not thin before using. 3. Allow sealer to penetrate surface for 15-20 minutes. Denser material may require more time to penetrate. DO NOT ALLOW EXCESS SEALER TO DRY ON SURFACE. Failure to remove excess sealer from surface may result in residue that may need to be mechanically removed. 4. Thoroughly wipe surface with multiple dry cloths to remove all excess sealer. 5. A second coat may be needed for more absorbent surfaces. If darker appearance is required, sealer should be applied one hour after initial application, as directed in steps 2-4. 6. Full cure is achieved after 24-72 hours. Avoid foot traffic for 6-8 hours after application. METHOD OF APPLICATION: For small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center. Do not use a power sprayer. A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results. Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes. Coverage - Gallon: 150-450 sq. ft. Expected Wear: 3-5 years.

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/dupont%20enhancer%20pro.pdf
AKUDFS
AKEMI ULTRA DARKENER, FOOD SAFE
Our Price: $69.94

Food Safe Enhancer for the ultimate aging effect on all stones. Interior and Exterior.

MSDS: http://stonetoolsupply.com/v/vspfiles/templates/AB/MSDS/akemi%20darkener%20ultra.pdf