|
|
|
|
 |
643650-4 BRUSH HOLDER CAP, 5007F
|
|

Repair your tool now with this Makita BRUSH HOLDER CAP, 5007F 643650-4. We offer the complete line of Makita replacement parts to keep your Makita power tools kicking.
|
|
 |
|
|
|
|
 |
Safety Glasses (Single Pair)
|
|

Adjustable Safety Glasses
The Alpha® Safety Glasses have a lightweight frame with
padded temples. The wrap around design provides superior protection
while assuring a comfortable wear for the entire work day.
Features
Lightweight Wrap Style Frame; Adjustable Side Arms;
Soft Rubber Nose Bridge; Clear Anti-Scratch Lenses
|
|
 |
|
|
|
|
 |
MAKITA RUBBER PAD
|
|

Rubber Pad, 4". For 900 Grinder, 9514B Disc Grinder, N9501BZ Disc Grinder, and GA4030K 4" Angle Grinder.
|
|
 |
|
|
|
|
 |
Rust Stain Remover 14oz Bottle
|
|

Rust Stain Remover (RSR-2000)
Rust Stain Remover in Gel Form
Alpha Professional Tools® leads the way with an innovative
product designed to quickly remove common rust stains from natural stone
surfaces or other types of material such as concrete, brick, terra
cotta, Mexican tile, or other hard porous surfaces. This unique product
comes as a pre-mixed gel in 14-ounce tubes and is easily applied to rust
stained areas. The RSR-2000 is specially formulated to work extremely
fast and will immediately begin to work upon contact with rust. In most
cases, the RSR-2000 will completely remove a rust stain within 5 minutes
or less. Professional contractors, monumentalists, tile contractors,
and fabricators will find that the RSR-2000 works much quicker than most
poultices and is substantially easier to use. Most poultices tend to be
messy and can take a long time to successfully remove stains. Alpha
Professional Tools® has designed this highly efficient product as a
non-hazardous chemical that is safe to use and will not harm the
environment. Since this product is spreadable because of its gel format,
large areas can quickly be covered in short amounts of time. A
versatile product, RSR-2000 can be used in a variety of areas such as
floors, countertops, vertical surfaces and exterior areas. If you have
rust stains, RSR-2000 is the best product for you.
Features
RSR-2000 covers approximately 4 square feet; Now Available in Trial Size!
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 3/8"+3"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 5/8"+2-3/4"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 3/4"+2-5/8"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 1"+2-1/2"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 1-1/4"+2-3/8"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |
|
|
|
|
 |
Corner Rulers - Ruler Radius 1-3/8"+2"
|
|

Unique tools for fabricating corners
Alpha® introduces a completely new idea to mark, cut and grind
the square corners of glass, tile, stone, steel, plastic and wood - the
Alpha® Corner Ruler. This patent pending Corner Ruler makes any
application easy and error free. Stone fabricators can use the Corner
Ruler in conjunction with a Profiler Z-Series to make a perfect corner
every time. Glaziers and tile contractors can mark not only the radius
but also cut the corner with a carbide glass cutter or the Alpha® Corner
Nipper. Home Builders can mark each corner quickly and easily for a
faster preparation time. Each Corner Ruler comes with two radiuses or
two 45-degree straight lines, each series has 14 patterns. The complete
set of 28 patterns covers all your needs. Each set comes in a stainless
steel case for organization.Prevent errors by doing it right the first
time with the Alpha® Corner Rulers.
|
|
 |