Home > Search for "omni cubed"
We found 23 results matching your criteria.
Filter:
Page of 1
OCAT1K
The Folding Kit enables the cart to be folded for easy storage (reduces cart width to only 9"). The Multi-top Accessory uprights can be quickly clamped into the Pro-Cart AT1 to enable transport of multiple smaller tops at the same time. The Lam-Clamp™ is revolutionizing the way shops perform natural and engineered stone countertop edge laminations. The clamps consistently out-perform traditional clamping methods (i.e. c-clamps) in speed, seam quality, and durability. Six clamp sizes are available, ranging from 5 inches to 6 feet in length. The shorter lengths are great for curves, the longer lengths are designed for speed. The longer lengths also feature a spring-loaded holding claw, which keeps the clamp in place during stone alignment. All clamps laminate 4 through 6 cm thick edges and feature hidden clamp threads to protect from epoxy contamination. Lam-Clamps are available in 5 in., 10 in., 2 ft., 3 ft., 4 ft., and 6 ft. lengths.

Lam-ClampTM

PATENT US7789379

PATENT US8047516

PATENT USD597813

The No-Spin Backer Pad provides faster results and less damage to surrounding vertical surfaces during polishing or refinishing. The product features a rigid aluminum Velcro backer, with the unique addition of a free-floating disc on top. Surrounding this disc is a protective rubber bumper that when pushed against a wall, mirror, or backsplash causes the disc to float (stop spinning) while the polishing pad continues to spin beneath it. The disc acts as a built-in roller guide, which allows fast and precise cut patterns, while also reducing the typical damage caused by the edge of spinning polishing pads. The backer has 5/8-11 threads and includes an aluminum spacer washer to protect against wear caused by polisher spindles. Available in three sizes for varying applications (4", 5", 7"); USA Patent Pending.
USA PATENT PENDING.
OC-4101-SHS OC-4113-SHSVCM
The No-Spin Backer Pad provides faster results and less damage to surrounding vertical surfaces during polishing or refinishing. The product features a rigid aluminum Velcro backer, with the unique addition of a free-floating disc on top. Surrounding this disc is a protective rubber bumper that when pushed against a wall, mirror, or backsplash causes the disc to float (stop spinning) while the polishing pad continues to spin beneath it. The disc acts as a built-in roller guide, which allows fast and precise cut patterns, while also reducing the typical damage caused by the edge of spinning polishing pads. The backer has 5/8-11 threads and includes an aluminum spacer washer to protect against wear caused by polisher spindles. Available in three sizes for varying applications (4", 5", 7"); USA Patent Pending.
USA PATENT PENDING.
The Original Sink Hole Saver™ is an innovative stiffening device that protects finished stone pieces from breakage during lifting, transport and installation. The product is an ideal solution to strengthen countertops and backsplashes, especially fragile stone pieces. The Sink Hole Saver™ features mechanical clamps, which stay secure around finished edges. Large, easy-grasp clamp knobs make the clamps effortless and quick to tighten. The stiffening rail is very strong, yet light-weight, and features a convenient sliding channel for custom placement of each clamp. Sink Hole Savers can be applied in the shop and left on the countertop all the way to and through the install!

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCM mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and can be re-pumped without removal from stone or loss of remaining suction. Use with the Original Sink Hole Saver™ for added versatility.

Please be cautious of cheaply made "look-alike" copies of our products. We are unmatched in quality, price, warranty, and service.

OC-601-SHS
The Mega-Jaw™ Carry Clamp has been designed for easier and safer carrying of countertops. The lightweight clamp (only 2.6 pounds) opens wide enough to accommodate tops up to 2.6" (66mm) thick. The clamps distribute the weight to both arms, reducing worker strain and enabling the safe and easy lifting of heavy pieces. The clamp features high-strength aluminum arms, and non-marking, tear resistant rubber gripping pads, and the clamps grip tighter as more weight is lifted. Max lifting capacity 500 lbs per pair.

Mega-JawTM Carry Clamp

The Original Sink Hole Saver™ is an innovative stiffening device that protects finished stone pieces from breakage during lifting, transport and installation. The product is an ideal solution to strengthen countertops and backsplashes, especially fragile stone pieces. The Sink Hole Saver™ features mechanical clamps, which stay secure around finished edges. Large, easy-grasp clamp knobs make the clamps effortless and quick to tighten. The stiffening rail is very strong, yet light-weight, and features a convenient sliding channel for custom placement of each clamp. Sink Hole Savers can be applied in the shop and left on the countertop all the way to and through the install! Available in 4, 6, and 8 ft. lengths.

The Lam-Clamp™ is revolutionizing the way shops perform natural and engineered stone countertop edge laminations. The clamps consistently out-perform traditional clamping methods (i.e. c-clamps) in speed, seam quality, and durability. Six clamp sizes are available, ranging from 5 inches to 6 feet in length. The shorter lengths are great for curves, the longer lengths are designed for speed. The longer lengths also feature a spring-loaded holding claw, which keeps the clamp in place during stone alignment. All clamps laminate 4 through 6 cm thick edges and feature hidden clamp threads to protect from epoxy contamination. Lam-Clamps are available in 5 in., 10 in., 2 ft., 3 ft., 4 ft., and 6 ft. lengths.

Lam-ClampTM

PATENT US7789379

PATENT US8047516

PATENT USD597813

OC-6113-SHSVCM OC-8101-SHS
OMNI CUBED 10" LAM CLAMP
Our Price: $375.00

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCM mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and can be re-pumped without removal from stone or loss of remaining suction. Use with the Original Sink Hole Saver™ for added versatility.

Please be cautious of cheaply made "look-alike" copies of our products. We are unmatched in quality, price, warranty, and service.

The Original Sink Hole Saver™ is an innovative stiffening device that protects finished stone pieces from breakage during lifting, transport and installation. The product is an ideal solution to strengthen countertops and backsplashes, especially fragile stone pieces. The Sink Hole Saver™ features mechanical clamps, which stay secure around finished edges. Large, easy-grasp clamp knobs make the clamps effortless and quick to tighten. The stiffening rail is very strong, yet light-weight, and features a convenient sliding channel for custom placement of each clamp. Sink Hole Savers can be applied in the shop and left on the countertop all the way to and through the install! The Lam-Clamp™ is revolutionizing the way shops perform natural and engineered stone countertop edge laminations. The clamps consistently out-perform traditional clamping methods (i.e. c-clamps) in speed, seam quality, and durability. Six clamp sizes are available, ranging from 5 inches to 6 feet in length. The shorter lengths are great for curves, the longer lengths are designed for speed. The longer lengths also feature a spring-loaded holding claw, which keeps the clamp in place during stone alignment. All clamps laminate 4 through 6 cm thick edges and feature hidden clamp threads to protect from epoxy contamination. Lam-Clamps are available in 5 in., 10 in., 2 ft., 3 ft., 4 ft., and 6 ft. lengths.

Lam-ClampTM

PATENT US7789379

PATENT US8047516

PATENT USD597813

OC-8113-SHSVCM
The Manual Stealth Seamer™ is the ultimate heavy-duty manual seam setter for joining and leveling seams. Countertop seams easily open and close by use of a smooth-turning knurled roller, and the working area is open and accessible with the units in place (removal is not needed in order to apply epoxy or scrape the seam). Four leveling components allow fine-tune adjustment on both sides of the seam, and they feature non-spinning, leveling feet with vinyl caps to prevent scratching of countertop surfaces. A red-line indicator on each cup alerts user if re-pumping is needed (can re-pump without removing units or losing suction). Use alone or in pairs; best for non-porous materials.

Stealth Seamer TM, Manual

PATENT USD644497

The Pro-Dolly TM _ HD1 ( TM _HD1 TM _) provides easier transport and installation of countertops, and is especially helpful when used in pairs for very tall, extremely heavy, or extra-large countertops. This aluminum-frame dolly features a lightweight and compact design which weighs only 21 pounds, yet has a rated capacity of 750 pounds (1,500 pounds when used in pairs for very large tops). The low profile dolly (only 5.38"_ from the support rail surface to the ground) allows rolling of tall tops through doors. The dolly features 8", non-marking, flat-free, closed-cell polyurethane tires which exhibit excellent shock absorption. The support rail is lined with durable rubber to prevent chipping, and countertops are secured with an integrated clamp (useful when lifting, the dolly stays attached).

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCM mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and can be re-pumped without removal from stone or loss of remaining suction. Use with the Original Sink Hole Saver™ for added versatility.

Please be cautious of cheaply made "look-alike" copies of our products. We are unmatched in quality, price, warranty, and service.

OC-4101-SHSVCA OC6113VCA
The Aqua-Jaw™ Carry Vise™ has been designed for easier and safer carrying of countertops. The Aqua-Jaw™ Carry Vise™ is the only all-weather Carry Vise designed to not slip off wet (or dusty) countertops. Super-tight vise action prevents stone from slipping, and the product works better than gravity-dependent carry clamps on stairs and other slanted install terrains. The carry vises distribute the weight to both arms, reducing worker strain and enabling the safe and easy lifting of heavy pieces up to 2.7 inches thick (800 pound capacity per pair). Dual, quick-spin tightening handles quickly secure the product, and rubber-lined gripping rails protect tops from scratches.

Aqua-JawTM Carry ViseTM

PATENT USD640522

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCA mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and are simultaneously suctioned to stone via a powerful, yet compact, battery-operated vacuum pump. Use with the Original Sink Hole Saver™ for added versatility.

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCA mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and are simultaneously suctioned to stone via a powerful, yet compact, battery-operated vacuum pump. Use with the Original Sink Hole Saver™ for added versatility.

OC8113VCA
OMNI CUBED PRO-CART AT1
Our Price: $725.00
Don't settle for cheap imitations, get the original!

The Pro-Cart AT1 provides a solution to the challenges associated with large and cumbersome countertop installation carts. The cart is constructed from aluminum tubing, so it is strong and lightweight at less than 50 pounds. Important for climbing stairs, the cart stays attached to the countertop when lifted and the 8" casters allow resting on stair treads. Pneumatic casters dampen vibrations and enable travel across rough terrain such as gravel or lawns. The cart's high ground-clearance allows popping of wheelies over larger curbs, and in many cases one person can operate the cart by themselves. Tops are secured by clamps located on each side of the cutout to reduce breakage in the middle. The wheelbase is wide enough to make the cart very stable, but still fits on truck ramps and enables maneuvering through very tight spaces.

Max Clamp Opening: 69mm (2.7")
Weight Capacity: 750 lbs

Pays for itself after one prevented break!™

The Sink Hole Saver™ VCA mounts to the surface of stone for reinforcement during lifting, transport, and installation. The surface-mount feature provides a unique solution for wall panels and high-low installation applications. The 6" vacuum cups slide and lock for custom placement, making this product ideal for protecting bump-out countertops and porcelain slabs. The vacuum cups feature a closed seal for a reliable hold, and are simultaneously suctioned to stone via a powerful, yet compact, battery-operated vacuum pump. Use with the Original Sink Hole Saver™ for added versatility.

The Makita Pro-Anchor™ T-31 Anchor Machine is used to easily and precisely cut curved T-slots in the back side of stone pieces for the attachment of anchor bolts used in bottom-mount sink or architectural facing systems. The machine features a split-clamp design for optimum grinder stability (unlike weak set-screw holders on other anchor machines). The machine is available with or without a vacuum-powered base. Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near cut outs or edges (i.e. the entire vacuum base does not have to be in contact with the surface). The vacuum base seal is cut as one piece of neoprene foam; this seamless design provides a superior leak-free seal with the stone to guarantee minimal air consumption. The machine also features industrial quick-couplers for both air and water, and the efficiently designed venturi vacuum generator creates high vacuum pressure with very low air consumption (only 0.5 SCFM). The machine cuts in both push and pull direction, and the water hose with ball valve and quick-coupler can be easily detached to spray the work area. The grinder accepts any T-31 anchor bit with a 1/4" shank. One-year manufacturer's limited warranty (grinders are covered under their respective manufacturer's warranties). Electric Model: A powerful and reliable electric Makita grinder with GFCI outlet adapter and a carrying/storage case are included.

Pro-Anchor TM T-31 Machine

OMNI CUBED PRO-CART AT2
Our Price: $1,150.00

Stealth Seamer TM, Automatic (aka Automatic Stealth Seamer) is the ultimate heavy-duty automatic seam setter for joining and leveling seams. The product features strong 8" vacuum cups which provide full-contact reliable hold, and the powerful, yet compact, vacuum pump maintains pressure for all cups and operates on AC power or a single 9V battery (for installations where electricity is not available). Countertop seams easily open and close by use of a smooth-turning knurled roller, and the working area is open and accessible with the units in place (removal is not needed in order to apply epoxy or scrape the seam). Four leveling components per seam setter allow "fine-tune" adjustment on both sides of the seam, and they feature non-spinning, leveling feet with vinyl caps to prevent scratching of countertop surfaces. The eight leveling points provide total control along the entire seam to eliminate the unevenness caused by warped countertops.


Stealth Seamer TM, Automatic

PATENT USD644497

The Pro-Cart AT2 is Omni Cubed's new generation all-terrain countertop installation cart! The AT2 includes the same features as the popular AT1 model, with even more benefits. The AT2 features collapsible clamp uprights for easy countertop removal and tilting of large stone pieces onto cabinets. Climbing stairs with the AT2 is even easier due to the innovative adjustable wheel base (the distance between the cart's front and back wheels has 4" of sliding adjustment to match varying depths of stair treads). For ease of storage and sliding down the center of A-frames, the included folding kit and collapsible uprights enable folding of the AT2 into a very compact design. The AT2 features large 10" casters, has a rated weight capacity of 1,000 pounds, and still weighs in at less than 65 pounds!