Home > CNC
We found 9 results matching your criteria.
Finger Bits
Filter:
Page of 1
ALDND01250
Alpha CNC Core Bits for Dekton
Our Price: $85.05

Alpha CNC Core Bits for Dekton®

Diameter: 1-1/4"
Max RPM: 3,500
Recommended For: Dekton®, Crystallized Glass
Threads: 1/2" Gas Thread

Alpha® introduces a Wet Core Drill Bit for CNC Machines
and Radial Arm workstations for cutting Dekton®, Crystallized
Glass and other vitreous materials. This Core Bit comes with a
1/2” Gas Thread, designed for the tool holder. The diamonds and
matrix have been selected to minimize blow-out at the bottom of
the stone, since most CNC Router fabrication is done upside-down.
This new Core Bit utilizes the superior technology that has made
the Alpha® Wet and Dry Core Bits the best in the industry.
ADEKCNCB138
Alpha 1-3/8" CNC Core Bits for Dekton
Our Price: $95.79

Alpha CNC Core Bits for Dekton®

Diameter: 1-3/8"
Max RPM: 3,500
Recommended For: Dekton®, Crystallized Glass
Threads: 1/2" Gas Thread

Alpha® introduces a Wet Core Drill Bit for CNC Machines
and Radial Arm workstations for cutting Dekton®, Crystallized
Glass and other vitreous materials. This Core Bit comes with a
1/2” Gas Thread, designed for the tool holder. The diamonds and
matrix have been selected to minimize blow-out at the bottom of
the stone, since most CNC Router fabrication is done upside-down.
This new Core Bit utilizes the superior technology that has made
the Alpha® Wet and Dry Core Bits the best in the industry.
CYFB158CNC
CYCLONE FINGER BIT 1-5/8" SEGMENT HIGH SPEED FINGER BIT
Our Price: $129.00

The New Super Cyclone Finger Bit has a smaller diameter and six segments designed to cut faster. Ideal for hard materials. High Speed Parameters: * Feed rate : 15" - 22"/min. Standard Speed Parameters: * Feed rate : 10" - 15"/min
DSAFB5020BS
DS ABSOLUTE FINGER BIT 50MM X 20MM W/ BOTTOM SEGMENT
Our Price: $129.00

~ Fast cutting (350~580mm/min)

~ Low Ampere (Under 10A)

~ Granite, Marble, Engineered stone,    Sandston, Limestone

~ Best solution on any CNC
DSGMBFB5020
GMB FINGER BIT
Our Price: $129.99

- Dual satisfaction for soft material… Fast and Clean Cutting.
- Incredibly longer life span than Vacuum or Electroplated products.

- Wet use only.
ALDNC01375
Alpha CNC Wet Core Bit
Our Price: $136.85

Alpha CNC Wet Core Bit

Diameter: 1-3/8"
Max RPM: 2,000
Recommended For: Granite/Eng.Stone
Threads: 1/2" Gas Thread

Alpha® introduces a Wet Core Drill Bit for CNC Machines and Radial
Arm workstations. This Core Bit comes with a 1/2” Gas Thread, designed
for the tool holder. The diamonds and matrix have been selected to minimize
blow-out at the bottom of the stone, since most CNC Router fabrication is
done upside-down. This new Core Bit utilizes the superior technology that
has made the Alpha® Wet and Dry Core Bits the best in the industry.
CYFB200HS
CYCLONE HIGH SPEED FINGER BIT 2"
Our Price: $139.00

Diamax Industries presents the NEW for 2012 Cyclone seven segment finger bit. Seven segments are unheard of because typically more finger bits only have 6 segments. Seven segments translates into faster cutting and a more efficient CNC operator. Formulated with a soft bond, this finger bit is ideal for use on hard natural stone. Always dependable, these high-performance 1/2 gas threaded bits are versatile and are to be used wet.. The bottom segment on the end of the bit gives the CNC operator the option of drilling into the slab like a core bit. The New Super Cyclone Finger Bit has a smaller diameter and six segments designed to cut faster. Ideal for hard materials. High Speed Parameters: * Feed rate : 15" - 22"/min. Standard Speed Parameters: * Feed rate : 10" - 15"/min
ALFBG040
CNC Segmented Finger Bits - 40mm
Our Price: $145.03

CNC Segmented Finger Bits
Segmented Finger Bits
Recommended For: Granite/Eng.Stone

Size: 40mm
Diameter: 30mm
Max RPM: 4,500

Alpha® continues to expand its line of tooling for the CNC
machines and has designed a Segmented Finger Bit for CNC
Machines and Radial Arm workstations. This finger bit is available
in two lengths for different thicknesses of materials, 40mm is for 1-1/4”
slab and 50mm is for 1-1/2” laminated materials. These bits come with a
1/2” Gas Thread, designed for the tool holder and can be used on granite
and engineered stone on all CNC machines designed for stone.
ALFBG050
CNC Segmented Finger Bits - 50mm
Our Price: $149.65

CNC Segmented Finger Bits
Segmented Finger Bits
Recommended For: Granite/Eng.Stone

Size: 50mm
Diameter: 30mm
Max RPM: 4,500

Alpha® continues to expand its line of tooling for the CNC
machines and has designed a Segmented Finger Bit for CNC
Machines and Radial Arm workstations. This finger bit is available
in two lengths for different thicknesses of materials, 40mm is for 1-1/4”
slab and 50mm is for 1-1/2” laminated materials. These bits come with a
1/2” Gas Thread, designed for the tool holder and can be used on granite
and engineered stone on all CNC machines designed for stone.